**Features and benefits:**

- Always connected: Free integrated 4G, WiFi and LAN for stable and reliable operation. 
- 5-year warranty.
- MID-certified energy meter for fair billing and simplified administration.
- One of the most complete/advanced dynamic load balancing and phase balancing on the market.
- Future-proof, ready for future technologies with ISO15118 support.
- Cost-effective and scalable solution, install unlimited number of charging boxes and expand easily.

Product description

**General:**

- Manufacturer: Charge Amps
- Manufacturer part number: 131595
- EFUEL part number / SKU: E260
- Manufacturer Warranty: 5 years


**Technical Information:**

- Charging current: 6-32 A or 1-3 phase
- Voltage: 230/400 V
- Operating temperature: -35°C to +45°C
- Identification: RFID
- Charging standard: Mode 3
- Connectivity: WiFi, 4G LTE-M\*, Bluetooth, LAN available with separate module
- Communication protocol: OCPP 1.6J
- Protection against fault currents: built-in earth leakage circuit breaker type B according to IEC 60947-2. AC: 30 mA, DC: 6 mA
- Short circuit protection: Included, 32A C characteristic
- Energy measurement: MID, 3-phase voltage, current and power
- IP rating: IP 54 inner case/module; IP 44 outer case
- IK rating: IK 10
- Socket: Type 2, 22 kW
- SIM card: included in the charger
- Incoming power cable, conductor dimensions: Installation from top or bottom: 16 mm², Installation from rear: 10 mm²


**Dimensions and weight:**

- Dimensions: (W × D × H) 250 × 145 × 378 mm
- Weight: 4.2 kg


\*4G connectivity requires coverage via the LTE/LTE-M network. 4G connectivity (LTE/LTE-M) is included.

Specifications

**Product sheet:**

[Product sheet (EN)](<https://efuel-cdn.imgix.net/cms/Charge_Amps_product_sheet_dawn_Pro_SE_250902_5633fda1b9/Charge_Amps_product_sheet_dawn_Pro_SE_250902_5633fda1b9.pdf>)

**Manuals:**

[Installation manual (EN)](<https://efuel-cdn.imgix.net/cms/Dawn_Pro_DE_Installation_Manual_rev_04_en_b771832d82/Dawn_Pro_DE_Installation_Manual_rev_04_en_b771832d82.pdf>)

[User manual (EN)](<https://efuel-cdn.imgix.net/cms/Dawn_Professional_DE_User_Manual_rev_03_en_dfabff3976/Dawn_Professional_DE_User_Manual_rev_03_en_dfabff3976.pdf>)

**Training:**

Become a certified Charge Amps installer via the Charge Amps Academy training courses. [To the Charge Amps Academy](<https://www.chargeamps.com/sv/academy/>).

**Sales material:**

Find sales material for Charge Amps [here](<https://www.efuel.se/material/salj-och-marknadsmaterial>).

Material

**Charge Amps Dawn Professional** is developed for BRFs, companies and commercial properties that want a cost-effective, scalable and future-proof solution.

**What makes Charge Amps Dawn Professional unique?**\- Always connected with built-in free 4G and WiFi/LAN - MID certified for secure charging - Support for Plug & Charge (ISO 15118) - easier and safer charging - Award-winning load and phase balancing via the cloud - Ready for series connection straight out of the box - save time on installation - Full user and cost control via Charge Amps Cloud

**Plus**\- Smart technology - Lower running costs - Green Charging - charge alongside solar - 5 year warranty for maximum peace of mind

Whether your customers are running a business, managing a housing association or expanding their charging infrastructure, Charge Amps Dawn Professional is built to grow with their needs.

Charge Amps Dawn Professional is designed for housing associations, businesses and commercial properties that want a cost-effective, scalable and future-proof solution.


Charge Amps Dawn Professional

Title

Dawn Professional

Default Title

**Features and benefits:**

*Adapted for different conditions:*

When Charge Amps Aura is connected to Charge Amps Cloud, you have full control over the charger and its functions such as load balancing and scheduling. In the cloud you will find the history for reporting and statistics.

In the same way as when you update your mobile phone, we send out updates over the air to ensure that the charging station always has the latest software with all the functions.

Of course, Charge Amps Aura can also be connected to cloud services that are compatible with OCPP so that you can manage most functions yourself. These include, for example, scheduling, load balancing and adding payment functions.

**Partner account with Charge Amps:**

Keep in mind that as an installer, you need to get a Partner account to be able to install, configure and best manage Charge Amps' various products. All more advanced settings, such as setting up and configuring a load balancer, require such a Partner account.

*How do you get a Partner account?* Visit the Charge Amps Help Center and submit a request by selecting the "Partner Account" option in their support form - [link](<https://support-se.zendesk.com/hc/sv-se/requests/new>).

**General:**

- Manufacturer: Charge Amps
- Manufacturer warranty: 5 years


*Charge Amps Aura RCD:*

- Manufacturer Part Number: 131502
- EFUEL part number / SKU: E527


*Charge Amps Aura RCD 4G:*

- Manufacturer's part number: 131503
- EFUEL's article number / SKU: E528


**Technical Information:**

- Charging current: 6-32 A, single or three phase per socket.
- Voltage: 230/400 V.
- Charging standard: Mode 3.
- Operating temperature: - 35 °C to + 45 °C.
- Identification: RFID.
- Internet connection: Wifi, LAN and 4G (applicable to some models).
- Communication protocol: OCPP 1.6J (applicable to some models).
- Ground fault interrupter:
- Charge Amps Aura with product numbers 130908, 130909, 101010 & 101010-LTE: Separate DC fault current protection. RCBO type A complying with EN 61009-1 and EN 61009-2-1 is built into the charging station for each socket.
- Charge Amps Aura with product number 131502 & 131503: Built-in earth leakage circuit breaker Type-B protection complying with IEC 60947-2: AC: 30 mA, DC: 6 mA.
- Meter: Three-phase voltage, current and power output (corresponding to EU Measuring Instruments Directive 2014/32/EU).
- IP class: IP 55.
- IK class: IK 10.
- Sockets: Type 2, 2 × 22 kW simultaneously.
- Dimensions (W × D × H): 367 × 159 × 405 mm.
- Weight: 10 kg.
- Specifications of Charge Amps Aura 4G\*:
- RF technology: GSM, GPRS, EDGE, UMTS/HSPA+, LTE.
- Maximum RF output power: 32 dBm@GSM, 24 dBm@WCDMA, 23 dBm@LTE.
- SIM card: Standard SIM.


**Product sheet:**

[Product sheet (EN)](https://efuel-cdn.imgix.net/cms/Charge_Amps_product_sheet_aura_ENG_240411_low_res_77fae260d8/Charge_Amps_product_sheet_aura_ENG_240411_low_res_77fae260d8.pdf)

**Manuals:**

[Installation manual (EN)](https://efuel-cdn.imgix.net/cms/Aura_RCD_Installation_Manual_rev_01_en_bb42d21a4a/Aura_RCD_Installation_Manual_rev_01_en_bb42d21a4a.pdf)

[User Manual (EN)](https://efuel-cdn.imgix.net/cms/Aura_RCD_User_Manual_rev_01_en_2f8011ab2c/Aura_RCD_User_Manual_rev_01_en_2f8011ab2c.pdf)


**Videos:**

[Installation video (EN)](https://www.youtube.com/watch?v=49t8d9uKtw4&t=4s)

**Now with 5 years warranty and free 4G (for the 4G variant)**

Charge Amps Aura is compatible with OCPP and can be connected to any cloud service. Charge two cars simultaneously with up to 22 kW per socket. Aura comes complete with an associated cloud solution and the option to choose whether to use Charge Amps Cloud or another cloud service. Become a certified Charge Amps installer via the training courses at [Charge Amps Academy](<https://www.chargeamps.com/sv/academy/>).

- 2 x 22 kW, but can be set to any power level
- Load balancing between sockets
- Connection via LAN & WiFi or LAN & WiFi and 4G 
- Suitable for home charging and BRF, villa and business charging
- Compatible with Perific (Enegic) Monitor EVI (E293) and Charge Amps Amp Guard (E274) load balancers
- Built-in Type-B earth leakage circuit breakers complying with IEC 60947-2: AC: 30 mA, DC: 6 mA.

Charge Amps Aura is compatible with OCPP and can be connected to any cloud service. Charge two cars simultaneously with up to 22 kW per socket. Aura comes complete with an associated cloud solution and the option to choose whether to use Charge Amps Cloud or another cloud service. Become a certified Charge Amps installer via the training courses at [Charge Amps Academy](https://www.chargeamps.com/sv/academy/).

- 2 x 22 kW, but can be set down to any power
- Load balancing between sockets
- Connection via WiFi or 4G
- Suitable for home charging and BRF, villa and business charging
- Compatible with Enegic Monitor EVI (E293) and Charge Amps Amp Guard (E274) load balancers
- Built-in Type-B earth leakage circuit breakers complying with IEC 60947-2: AC: 30 mA, DC: 6 mA.

Charge Amps Aura

Variant

Charge Amps Aura (RCD)

Aura (RCD)

Charge Amps Aura 4G (RCD)

**Features and benefits:**
The Charge Core can charge up to 7.4 kW on a single-phase circuit and up to 22 kW on a three-phase circuit. The charger is continuously updated with the latest functionality.

- Easee Link™ local load and phase balancing.
- Automatic queue system.
- Permanent locking of the Type 2 cable.
- Integrated RFID reader (NFC / ISO 14443 and MIFARE Classic®).
- Universal, fits all types of electric cars and power supplies.
- Full control with Easee App or third party integrations.
- Manufacturer's warranty 3 years in EU.
- Built-in residual current device (RCD).*

_*Integrated residual current device of Type A 30 mA AC approved according to EN 60947-2, as well as 6 mA
residual current detection device (RDCDD) according to IEC 62955, 9.9. The RCD cuts the current if a residual current exceeding 6mA DC or 30mA AC is detected. The earth fault circuit breaker is automatically tested between each charging occasion or at least every 24 hours. To manually start the RCD test, use the Installer App._

- Manufacturer: Easee

EFUEL's article number / SKU
- Easee Charge Core - Black [E329]
- Easee Charge Core - White [E540]
- Easee Charge Core - Anthracite Gray [E541]
- Easee Charge Core - Red [E542]
- Easee Charge Core - Blue [E543]

**Technical specification:**

**Connection Point Protection**
- Integrated RCD type A 30 mA AC according to EN 60947-2.
- Integrated RDC-DD 6mA DC according to IEC 62955, 9.9.
- Temperature monitoring.
- Overload protection.
- Degree of protection: IP54 (the back is IP22 without cover).
- Impact resistance: IK10.
- Insulation class: I.
- Overvoltage category III.
- Theft protection.

**Complies with the following regulations**
- 2014/53/EU (RED).
- 2011/65/EU (RoHS).
- 2014/30/EU (EMC).
- 2014/35/EU (LVD).
- See DoC for details at easee.com/doc

**Charging power**
- 1-phase: 1.4 kW (6 A) - 7.4 kW (32 A).
- 3-phase TN: 4.1 kW (6 A) - 22 kW (32 A).
- 3-phase IT: 2.4 kW (6 A) - 12.7 kW (32 A).

**Electrical Specifications**
- Voltage: 3x 230 V / 400 V AC (±10%).
- Mains frequency: 50 Hz.
- Power supply: TN, IT, TT.
- Connection point: Type-2 socket.
- Automatic adjustment of charging speed based on available power.
- Automatic phase balancing.
- Built-in energy meter (±2%).
- Unlimited number of chargers per installation.

**Connection**
- Wi-Fi 2.4 GHz b/g/n.
- Bluetooth BLE 4.2.
- Built-in eSim (LTE Cat M1).
- OCPP 1.6.
- Easee LinkRF (between charger / between charger and Equalizer).
- Built-in RFID/NFC reader for access control.
- Easee App for control and monitoring.

**Dimensions and weight:**
- Dimensions (mm): H: 256 x W: 193 x D: 106.
- Wall mounting (mm): c/c H: 160 x W: 125.
- Working temperature: -30 °C to +40 °C.
- Weight: 1.5 kg.

**Installation**
- Automatic detection of power grids (TN, IT, TT).
- Circuit breaker: Max 80A.
- Max number of chargers per circuit: 101 pcs
- The size of the fuse must be configured by an electrician in the back plate of the charger using the Easee Installer App.
- Wire cross section: up to 16 mm2 (one cable) / up to 10 mm2 (parallel connection).
- Cable diameter: 8–22 mm.
- Final tightening: 5 Nm.
- Unsheathing length: 12 mm.

**Product sheet:**

[Easee Charge Core - Product sheet (EN)](https://efuel-cdn.imgix.net/cms/EN_Charge_Core_Productsheet_c3551172c7/EN_Charge_Core_Productsheet_c3551172c7.pdf)

[Easee Charge Core - Brochure Commercial Charging (EN)](https://efuel-cdn.imgix.net/cms/EN_Commercial_Charging_Brochure_V1_01_5767202986/EN_Commercial_Charging_Brochure_V1_01_5767202986.pdf)

[Easee Charge Core - Installer's Guide (EN)](https://efuel-cdn.imgix.net/cms/EN_Charge_Core_IG_75d971a5f7/EN_Charge_Core_IG_75d971a5f7.pdf)

[Easee Charge Core - User Guide (EN)](https://efuel-cdn.imgix.net/cms/EN_Charge_Core_UG_f1de36f027/EN_Charge_Core_UG_f1de36f027.pdf)

[Easee Charge Core - EU Declaration of Conformity (DOC) (EN)](https://efuel-cdn.imgix.net/cms/07a_Declaration_of_Conformity_Charge_Core_f707350d14/07a_Declaration_of_Conformity_Charge_Core_f707350d14.pdf)

**Easee Charge Core** is a scalable solution to promote the deployment of multiple charging points in commercial buildings and apartment complexes. Continuous updates ensure that your charger always has the latest functionality. The Charge Core is equipped with advanced features such as Easee Link™ for local load and phase balancing, an automatic queuing system and permanent locking of the Type 2 cable, making it the perfect solution for both condominiums and commercial environments. In addition, you can easily monitor and control charging via the Easee App or integrate it with third-party systems for maximum flexibility. Explore an intelligent, scalable and cost-effective charging solution that is ready to meet the demands of the future.

- **Phase balancing:** The product offers a unique phase balancing that automatically selects between 1-phase and 3-phase charging based on available capacity in each phase (dynamic load balancing against the property via [Equalizer](https://www.efuel.eu/products/load-balancers/equalizer-home-han-port). This makes it possible to utilize close to 100% of the available energy, which contributes to efficient charging over time.

- **Safety:** The charger has an integrated residual current device (RCD) that self-tests between each charging session and at least once every 24 hour period. Using more than forty sensors inside the charger, it continuously monitors for faults and abnormal changes in currents, voltages, temperatures and humidity, both during charging and in standby mode. In the event of an unexpected temperature increase, the charging box will automatically shut down and warn you if a certain safety limit is reached.

- **Easy installation:** With a built-in and approved ground fault circuit breaker, the installer can easily parallel connect the charging stations on the same circuit, saving both time and money. The Easee Installer app allows installers to manage chargers directly from their phone. The app offers a flexible solution for adding circuits and backplates to new and existing charging facilities, simplifying the process.

- **Scalable:** The Easee Ready backplate enables easy expansion of the charging infrastructure by clicking additional chargers into place. This allows for smooth growth for various applications, from residential to commercial use, and ensures that future needs are met.

Are you an installer and would you like to become a reseller of Easee Charge Core? The charging box is designed to deliver maximum efficiency and can charge up to 22kW. Continuous updates ensure that your charger always has the latest functionality. The Charge Core is equipped with advanced features such as Easee Link™ for local load and phase balancing, an automatic queuing system and permanent locking of the Type 2 cable, making it the perfect solution for both condominiums and commercial environments. In addition, you can easily monitor and control charging via the Easee App or integrate it with third-party systems for maximum flexibility. Explore an intelligent, scalable and cost-effective charging solution that is ready to meet the demands of the future.

Easee Charge Core | Charging box for Housing societies and Companies

Color

Easee Charge Core

Charge Core

Black

White

Anthracite Grey

Blue

**Features and benefits:**MID-certified Charge Pro can charge up to 7.4 kW on a single-phase circuit and up to 22 kW on a three-phase circuit. The charger is continuously updated with the latest functionality.

- MID Class B accuracy, in accordance with EN 50470-3.
- Easee Link™ local load and phase balancing.
- Automatic queuing system.
- Permanent locking of the Type 2 cable.
- Integrated RFID reader (NFC / ISO 14443 and MIFARE Classic®).
- Universal, fits all types of electric cars and power supplies.
- Full control with Easee App or third party integrations.
- Manufacturer warranty Sweden 5 years.
- Built-in residual current device (RCD)\*


*\*Integrated Type A 30mA AC RCD approved to EN 60947-2, and 6mA residual current detection device (RDCDD) to IEC 62955, 9.9. The RCD will disconnect the power if a residual current exceeding 6mA DC or 30mA AC is detected. The RCD is automatically tested between each charging session or at least every 24 hours. To manually initiate the RCD test, use the Installer App.*

- Manufacturer: Easee


EFUEL part number / SKU

- Easee Charge Pro - Black [E802] 
- Easee Charge Pro - White [E803] 


**Technical specification:**

**Connection point protection**

- Integrated RCD type A 30 mA AC according to EN 60947-2.
- Integrated RDC-DD 6mA DC according to IEC 62955, 9.9.
- Temperature monitoring.
- Overload protection.
- Degree of protection: IP54 (the back is IP22 without cover).
- Impact resistance: IK10.
- Insulation class: I.
- Overvoltage category III.
- Anti-theft protection.


**Complies with the following regulations**

- 2014/53/EU (RED).
- 2011/65/EU (RoHS).
- 2014/30/EU (EMC).
- 2014/35/EU (LVD).
- See DoC for details at easee.com/doc


**Charging power**

- 1-phase: 1.4 kW (6 A) - 7.4 kW (32 A).
- 3-phase TN: 4.1 kW (6 A) - 22 kW (32 A).
- 3-phase IT: 2,4 kW (6 A) - 12,7 kW (32 A).


**Electrical specifications**

- Voltage: 3x 230 V / 400 V AC (±10%).
- Mains frequency: 50 Hz.
- Power supply: TN, IT, TT.
- Connection point: Type-2 socket.
- Automatic adjustment of charging speed based on available current.
- Automatic phase balancing.
- Built-in energy meter (±2%).
- Unlimited number of chargers per installation.


**Connectivity**

- Wi-Fi 2.4 GHz b/g/n.
- Bluetooth BLE 4.2.
- Built-in eSim (LTE Cat M1).
- OCPP 1.6.
- Easee LinkRF (between charger / between charger and Equalizer).
- Built-in RFID/NFC reader for access control.
- Easee App for control and monitoring.


**General information**

- Dimensions (mm): H: 256 x W: 193 x D: 106.
- Wall mounting (mm): c/c H: 160 x W: 125.
- Operating temperature: -30 °C to +40 °C.
- Weight: 1,5 kg.


**Installation**

- Automatic detection of mains (TN, IT, TT). 
- Circuit breaker: Max 80A.
- Maximum number of chargers per circuit: 101
- The size of the fuse must be configured by an electrician in the backplate of the charger using the Easee Installer App.
- Wire cross-section: up to 16 mm2 (single cable) / up to 10 mm2 (parallel connection).
- Cable diameter: 8-22 mm.
- Final tightening: 5 Nm. 
- Stripping length: 12 mm.

[**Product sheet (EN)**](https://efuel-cdn.imgix.net/cms/EN_Charge_Pro_Productsheet_V1_03_8967273420/EN_Charge_Pro_Productsheet_V1_03_8967273420.pdf)

[**Installation guide (EN)**](<https://efuel-cdn.imgix.net/cms/EN_Charge_Pro_IG_V1_00_edc5be164d/EN_Charge_Pro_IG_V1_00_edc5be164d.pdf>)

[**User guide (EN)**](<https://efuel-cdn.imgix.net/cms/EN_Charge_Pro_UG_V1_00_6e9fa23192/EN_Charge_Pro_UG_V1_00_6e9fa23192.pdf>)

[**For installers (EN)**](<https://efuel-cdn.imgix.net/cms/EN_Charge_Pro_Installers_V1_00_dd8604075b/EN_Charge_Pro_Installers_V1_00_dd8604075b.pdf>)

[**For housing associations and site owners (EN)**](<https://efuel-cdn.imgix.net/cms/EN_Charge_Pro_Site_Owners_V1_00_e827e31960/EN_Charge_Pro_Site_Owners_V1_00_e827e31960.pdf>)



**New reward program for installers.** Win great prizes with [Easee Champions](<https://www.efuel.se/nyheter/easee-champions>)

**Easee Charge Pro** is a scalable MID-certified solution for the deployment of multiple charging points in commercial buildings and apartment complexes. Continuous updates ensure that your customers' chargers always have the latest functionality. Charge Pro is equipped with advanced features such as Easee Link™ for local load and phase balancing, an automatic queuing system and permanent locking of the Type 2 cable, making it the perfect solution for both BRF and commercial environments. Plus, you can easily monitor and control charging via the Easee App or integrate it with third-party systems for maximum flexibility. Explore an intelligent, scalable and cost-effective charging solution that is ready to meet the demands of the future.

**MID certified**
A MID-certified EV charger designed to deliver accurate energy consumption measurements, clear invoices and full control over charging costs. A reliable and efficient way to charge your customers' EVs.

 **V2G-ready** 
Already compatible with the future ENISO15118-20 standard for bi-directional charging. When the EU regulation comes into force, you will be one step ahead.

**Phase balancing:** The product offers a unique phase balancing that automatically selects between 1-phase and 3-phase charging based on the available capacity of each phase (dynamic load balancing against the property via [Equalizer](<https://www.efuel.se/produkter/lastbalansering/equalizer-home-han-port>)). This makes it possible to utilize close to 100% of the available energy, contributing to an efficient charge over time.

**Safety:** The charger has an integrated residual current device (RCD) that self-tests between each charging session and at least once every 24 hours. Using more than forty sensors inside the charger, it continuously monitors for faults and abnormal changes in currents, voltages, temperatures and humidity, both during charging and in standby mode. In the event of an unexpected rise in temperature, the charging box will automatically shut down and warn you if a certain safety limit is reached.

**Easy installation:** With a built-in and approved earth leakage circuit breaker, the installer can easily parallel the charging stations on the same circuit, saving both time and money. The Easee Installer app allows installers to manage chargers directly from their phone. The app offers a seamless solution for adding circuits and backplates to new and existing charging facilities, simplifying the process.

 **Scalable:** The Easee Ready backplate allows for easy expansion of the charging infrastructure by clicking additional chargers into place. This provides a smooth growth for different applications, from residential to commercial use, and ensures that future needs are met.

Easee Charge Pro is a scalable MID-certified solution to promote the deployment of multiple charging points in commercial buildings and apartment complexes. Continuous updates ensure that your charger always has the latest functionality. Charge Core is equipped with advanced features such as Easee Link™ for local load and phase balancing, an automatic queuing system and permanent locking of the Type 2 cable, making it the perfect solution for both BRF and commercial environments. Plus, you can easily monitor and control charging via the Easee App or integrate it with third-party systems for maximum flexibility. Explore an intelligent, scalable and cost-effective charging solution that is ready to meet the demands of the future.

Easee Charge Pro | MID-certified charging station for BRF and Business

Färg

Easee Charge Pro

Charge Pro

Svart

**Faster installation**

 Backplate designed to make installation easier than ever.

**Remote management**

myWallbox business enables management of chargers, payments, user access, reporting and more. OCPP compatibility for integration into any backend.

**Better service and maintenance**

4G enables remote software updates. Enhanced security prevents unauthorized tampering, physical damage and cyber attacks. Charging cable easily replaced in case of damage.

**Cost optimization**

Dynamic Power Sharing for up to 100 chargers leading to more energy efficiency and lower costs. Internal meter with less than 2% error improves the accuracy of energy transfers.

**General:**

- Manufacturer: Wallbox
- EFUEL article number: E236
- Manufacturer warranty: 3 years
- Color: Black/Grey
- Charging mode (IEC 61851-1): Mode 3
- Operating temperature: -30 ºC to 50 ºC
- Storage temperature: -40 ºC to 70 ºC
- Standards: CE, UKCA, EAC and RCM marking. IEC 61851-1, IEC 61851-21-2, IEC 62196, BS 7671, IEC 60364; RED Directive 2014/53/EU and RoHS Directive 2011/65/EU.
- Cybersecurity: Tamper detection, secure update, secure boot, secure storage and encrypted communication.


**Electrical specifications:**
- Charging power: 7.4 kW, 11 kW and 22 kW
- Rated AC voltage: ± 10 %: 230 V, 400 V and 400 V
- Rated current: 32 A (1P), 16 A (3P) and 32 A (3P)
- Connector (IEC 62196): Type 2
- Cable thickness: Up to 13 mm²
- Configurable current: From 6 A to rated current
- Rated frequency: 50 Hz / 60 Hz
- Protection rating: IP55 / IK10
- Surge category: CAT III
- Residual current detection: DC 6 mA
- RCD: RCD type A required
- Internal meter: Class A equivalent (Error ≤ 2%), factory set.
- Other protection devices: External shunt (optional) (Breaks the circuit)
- Connectivity options: Wi-Fi, 4G, Ethernet, Bluetooth


**Dimensions and weight:**
- Dimensions: 204.3 x313 x 142.5 mm
- Weight: 2,5 kg

**Product sheet:**

[Technical data sheet (EN)](<https://efuel-cdn.imgix.net/cms/Pulsar_Pro_Shutter_Tethered_Datasheet_en_UK_2_2c7e66827d/Pulsar_Pro_Shutter_Tethered_Datasheet_en_UK_2_2c7e66827d.pdf>)

Built for both businesses and EV drivers - Pulsar Pro Socket is the new shared charging solution designed to be a perfect fit for condominiums, workplaces and fleets. It is a reliable, accessible charger for users and an easy-to-manage, cost-effective solution for charging operators and installers.

- Faster installation with pre-configured 4G (two years free 4G) and backplate designed for improved ease of use
- Easy remote management with myWallbox and OCPP compatibility for integration into any backend
- Better service and maintenance with remote software updates and improved security
- Cost optimization with Dynamic Power Sharing for up to 100 chargers leading to more energy efficiency and lower costs
- Wi-Fi, 4G, Ethernet and Bluetooth

Solution with sockets:
- Compatible with both Type 1 and Type 2 electric cars
- Charging cable can be temporarily locked in place
- Cable can be removed when not in use for safety reasons


Built for both businesses and EV drivers - Pulsar Pro Socket is the new shared charging solution designed to be a perfect fit for condominiums, workplaces and fleets. It's a reliable, accessible charger for users and an easy-to-manage, cost-effective solution for charging operators and installers.

Wallbox Pulsar Pro Socket

Wallbox Pro - Socket

Pulsar Pro Socket

**Faster Installation**

The backplate is designed to make installation easier than ever.

**Remote Management**

myWallbox business enables the management of chargers, payments, user access, reporting, and more.
OCPP compatibility for integration into any backend system.

**Improved Service and Maintenance**

4G allows for remote software updates.
Enhanced security that prevents unauthorized tampering, physical damage, and cyberattacks.
The charging cable can be easily replaced if damaged.

**Cost Optimization**

Dynamic Power Sharing for up to 100 chargers leads to more energy efficiency and lower costs.
The internal meter with less than 2% error improves the precision of energy transfers.






Description

**General:**

- Manufacturer: Wallbox
- EFUEL's article number: E338 and E339
- Manufacturer Warranty: 3 years
- Color: Black/Gray
- Cable length: 5 m/7 m
- Charging mode (IEC 61851-1): Mode 3
- Operating temperature: -30 ºC to 50 ºC
- Storage temperature: -40 ºC to 70 ºC
- Standards: CE, UKCA, EAC, and RCM marking. IEC 61851-1, IEC 61851-21-2, IEC 62196, BS 7671, IEC 60364. RED Directive 2014/53/EU and RoHS Directive 2011/65/EU.
- Cybersecurity: Tamper detection, secure update, secure boot, secure storage, and encrypted communication.

**Electrical Specifications:**

- Charging power: 7.4 kW, 11 kW, and 22 kW
- Rated voltage AC: ± 10%: 230 V, 400 V, and 400 V
- Rated current: 32 A (1P), 16 A (3P), and 32 A (3P)
- Connector (IEC 62196): Type 2
- Cable thickness: Up to 13 mm²
- Configurable current: From 6 A to rated current
- Rated frequency: 50 Hz / 60 Hz
- Protection class: IP55 / IK10
- Overvoltage category: CAT III
- Residual current detection: DC 6 mA
- RCD: RCD type A required
- Internal meter: Class A equivalent (Error ≤ 2%). Factory set.
- Other protective devices: External shunt (optional) (Circuit breaker)

**Dimensions and weight:**

- Dimensions: 198 x 201 x 99 mm
- Weight: 1.3 kg (without cable)






Built for both businesses and electric vehicle drivers – Pulsar Pro is the new shared charging solution designed to perfectly suit condominiums, workplaces, and vehicle fleets. It's a reliable, accessible charger for users and an easy-to-manage, cost-effective solution for charging operators and installers.

- Faster installation with pre-configured 4G (two years free 4G) and a backplate designed for improved user-friendliness
- Simple remote management with myWallbox and OCPP compatibility for integration into any backend
- Better service and maintenance with remote software updates and enhanced security
- Cost optimization with Dynamic Power Sharing for up to 100 chargers, leading to more energy efficiency and lower costs
- Charging cable can be easily replaced if damaged

Wallbox offers the Pulsar Pro as standard with 2 years of 4G included (From July 1, 2025, 4G data plans will no longer be included with any Pulsar Pro devices).

Built for both businesses and electric vehicle drivers – Pulsar Pro is the new shared charging solution designed to perfectly suit condominiums, workplaces, and vehicle fleets. It's a reliable, accessible charger for users and an easy-to-manage, cost-effective solution for charging operators and installers.

- Faster installation with pre-configured 4G and a backplate designed for improved user-friendliness
- Simple remote management with myWallbox and OCPP compatibility for integration into any backend
- Better service and maintenance with remote software updates and enhanced security
- Cost optimization with Dynamic Power Sharing for up to 100 chargers, leading to more energy efficiency and lower costs
- Charging cable can be easily replaced if damaged

Wallbox Pulsar Pro 

Cable length

Wallbox Pulsar Pro

Pulsar Pro

5 meters

7 meters

Before commissioning, you should undergo technical training for the product. You can register for the training on Zaptec's website via this link: https://zaptec.confetti.events/international

**General:**

- Manufacturer: Zaptec
- EFUEL's item number / SKU: E851
- Manufacturer's warranty: 5 years

**Technical Information:**

- Number of Phases: 1-phase & 3-phase
- Maximum Charging Power: 22 kW
- Cable or Socket: Socket
- IP Rating: IP54
- Built-in Energy Measurement: Yes
- Approved for Tax Deduction: Yes
- Residual Current Device: Built-in type B residual current device
- Manufactured in: Norway
- Brand: Zaptec
- RFID: Yes
- Adjustable Power: Yes
- Load Balancing: Yes, optional
- OCPP: Yes
- App Connection: Yes
- Connectivity: Yes WIFI & 4G






**Manualer:**

[User manual)](https://efuel-cdn.imgix.net/cms/ZAPTEC_Pro_User_Manual_02fe648b53/ZAPTEC_Pro_User_Manual_02fe648b53.pdf)



**Zaptex Pro MID including back plate**

Zaptec Pro is a smart and efficient charging station for housing associations, companies, municipalities, shopping centers, and other organizations that offer private and public parking spaces.

- Including backplate
- Powerful 22kW charger
- Durable design adapted for our Nordic climate
- 4G to ensure continuous communication between charging stations
- Support for Plug & Charge (ISO15118)
- Suitable for home charging and housing association, villa, and company charging
- Compatible with load balancers Enegic Monitor - Zaptec (E290-291)

Zaptec Pro is a smart and efficient charging station for housing associations, companies, municipalities, shopping centers, and other organizations that offer private and public parking spaces.

- Including backplate
- Powerful 22kW charger
- Durable design adapted for our Nordic climate
- 4G to ensure continuous communication between charging stations
- Support for Plug & Charge (ISO15118)
- Suitable for home charging and housing association, villa, and company charging
- Compatible with load balancers Enegic Monitor - Zaptec (E290-291)

Dawn Professional

Article number: E260

The product fits with

Charge Amps

Installation kit for Charge Amps Dawn - Garo terminal block

Next Green

Pedestal Next Pole

Gacia

Gacia RCD Type A PR8NM 4P 30mA, 25-63A

Charge Amps

Column

EFUEL

Charging cable type 2, 20A, 3-20m

ONEPOLE

BOX Dual (Ø60mm) - Charge Amps Dawn

Other customers also viewed

Charge Amps

Aura (RCD)

Easee

Charge Core

Easee

Charge Pro

Wallbox

Pulsar Pro Socket