Before Installation:

• Ensure that you have a Wi-Fi network with a password, and it must operate on the 2.4 GHz frequency.
• Wi-Fi is required for updating the Easee Equalizer to version 0.99 or higher.
• Installation is done using the Easee Installer app.
• This solution is independent of the operator, and you can use any app.
• The installation process takes approximately 1 hour.
• Please note that the manual is not included in the package and should be printed out before installation or viewed via a mobile device.

Installation:

• Install the Easee Home charging station.
• Install the Easee Equalizer Home package following the manual provided here.
• Activate both the Easee Home and Equalizer using the Easee Installer app.
• Update the firmware for both the Easee Home and Easee Equalizer.
• Configure the system and transfer ownership to the customer.
• Now, the charging station can be connected to any compatible app.

General:

• Manufacturer: Easee
• EFUEL's Article Number / SKU: E144
• Manufacturer's Warranty: 3 years

Technical Information:

• Input: Max 30A
• Output: 333mV
• Operating Temperature: -15°C to 60°C

Dimensions and Weight:

• Dimensions (mm): H: 41 x W: 24 x D: 26.5
• Diameter: 10 mm

Package Includes:

• 1 x Easee Equalizer (HAN-port RJ45)
• 1 x Eastron SDM630MCT-MV 3-phase meter - 4 modules
• 1 x Tufvassons current transformer - 3 modules
• 1 x RJ12 cable (1.5 m / 6-pin)
• 3 x CT clamps (max 30A)

Not Included (Required):

• 3 x 10A fuses for the Eastron meter - 3 modules
• 3 x fuses for the charging station - 3 modules