General:

• Supplier: Go-e
• Lev. article no:
• EFUEL article no.: E650
• Stationary charging station: According to EN IEC 61851-1:2019
• Dimensions (W x H x D): Approx. 18.6 x 29.7 x 9.9 cm
• Weight (including charging cable) Approx. 5.25 kg
• Mounting method Wall, stand/pillar
• Charging cable Length 6 m
• Cross-section 5 x 6 mm² + 1 x 0.5 mm²
• Mains connection cable (to be specified by installer)
• Permissible cable area: 3 x 1.5 mm² - 5 x 10 mm²
• Permitted cable diameter: 10 mm - 20 mm
• Wiring options: above | below | behind
• Connection: single or three phase
• Rated voltage: 230 V - 240 V (single phase) / 400 V - 415 V (three phase)
• Rated frequency: 50 Hz
• Rated current: 16 A (single phase/three phase) 32 A (single phase/three phase)
• Mains forms: TT / TN / IT

Safety:

• DC protection device with DC detection and additional AC detection: 6 mA DC, 20 mA AC (On the building side, an RCD type A and a miniature circuit breaker need to be installed. Local installation standards must be followed)
• IP55: Protection against dirt and water, for permanent outdoor use
• Protection class: I
• Pollution degree: II
• User identification: Can be activated if required. Authentication via RFID or APP possible. 1 learned RFID chip included
• Input voltage: Phase and voltage test
• Switching functions: Control of switching functions
• Earthing control: For TT, TN networks (disengageable earthing control for IT networks - Norgel mode)
• Current sensor: 3-phase
• Temperature sensor: Regulation of charging current in case of overheating

Communication:

• RFID: 13.56 MHz
• WiFi: 802.11b/g/n 2.4 GHz / frequency range 2412-2472 Mhz
• Bluetooth: BLE ready (2.4 GHz)
• Mobile connectivity: LTE FDD LTE FDD (B1/3/5/7/8/20) / GPRS / EGPRS (GSM 900MHz/GSM-DCS 1800MHz)
• Ethernet: 10/100 Mbit/s, RJ45 connector, LSA terminals
• Digital Input: 2 x non-isolated inputs, which can be connected to various equipment, e.g. a ripple control receiver
• Digital Output: 1x fully isolated break contact to support fault isolation or other regulatory requirements. 230 V AC / 30 V DC, 5 A
• Mains communication: Physical layer in accordance with ISO 15118-3
• API: Open and documented local + cloud HTTP API, Modbus TCP, MQTT
• OCPP 1.6 (Json): Communication with backend systems for smart charging and transaction cost billing

Mobile connectivity:

• Mobile subscription: Minimum 5 years free mobile connection.
• Possibility of renewal for €12 (incl. VAT) per year.
• Type of SIM card Factory-integrated eSIM from go-e (not exchangeable).
• Factory-installed and customer-owned nano-SIM for larger B2B projects.
• Activate/deactivate at any time via go-e app or API
• Type of connections Standard: 4G LTE Cat-1
• In case of limited reception: 2G / EDGE
• Country-specific connectivity availability: Unlimited mobile connectivity in all EU countries, UK, Switzerland, Norway and Liechtenstein. Free roaming between these countries
• Mobile networks: An overview of the mobile networks used in the above-mentioned countries can be found on the go-e website under Support/FAQ.

**Charging power & ambient conditions:**Maximum charging power: 11 kW (16 A, 3-phase), 3.7 kW (16 A, 1-phase)

Product sheet Product sheet(EN