Specifications

General:

Supplier: go-e
Item number: CH-05-22-51
EFUEL article number: 11 kW: E505 22kW: E506
EAN-artikelnummer: 9120087412006

Maximum charging power:

Stationary charging box: In accordance with EN IEC 61851-1:2019
Dimensions: Approx. 15.5 x 26 x 11 cm
Weight: 2.34 kg
Connection cable: 1.8 m, 5 x 6 mm², for fixed connection (type H07BQ-F)
Connection: Single or three-phase
Rated voltage: 230 V - 240 V (single phase) / 400 V - 415 V (three phase)
Rated frequency: 50 Hz
Grid type: TT / TN / IT
Standby power: 3.1 W (LEDs dark) to 5.2 W (LEDs lit)
RFID: 13.56 MHz
WLAN: 802.11b/g/n 2.4 GHz / frequency band 2412-2472 MHz
Mobile connectivity: 4G | LTE / 2G | EDGE / Supported frequency bands: GSM900, GSM1800, LTE FDD: B1 B3 B5 B7 B8 B20 / Frequency range: 800 MHz to 2600 MHz
Mobile subscription: Free mobile connection for at least 5 years. Extension possible for 12 euros (incl. VAT) per year.
SIM card format: Factory integrated eSIM from go-e (not interchangeable). Factory-fitted nano-SIM for larger B2B projects.
Mobile connection activation/deactivation: Always via go-e App or API
Connection types: Standard: 4G LTE Cat-1. Fallback for limited reception: 2G / EDGE
Country availability go-e tariff: Free mobile connection in all EU countries, UK, Switzerland, Norway and Liechtenstein. Free roaming between the above countries.
Mobile networks: Overview of mobile networks used can be found on the go-e website under Support/FAQ.
WLAN hotspot: Yes (can be disconnected)
WLAN connection: Yes
4G / LTE: Yes
2G / EDGE (Fallback): Yes
App connectivity: Yes (via WLAN and mobile)
OCPP: Yes (via WLAN and mobile)
Dynamic electricity prices: Yes (via WLAN and mobile)
Static load management: Yes (via WLAN and mobile)
Dynamic load management with go-e Controller: Yes (controller must have internet connection)
Connection to photovoltaic system with go-e Controller: Yes (controller must have internet connection)
Charge log recording and export: Yes (via WLAN and mobile)
HTTP Cloud API: Yes (via WLAN and mobile)
MQTT API: Yes via WLAN / No via mobile
Modbus TCP: Yes via WLAN / No via mobile
Installation location: Indoor and outdoor
Operating temperature: -25 °C to +40 °C
Storage temperature: -40 °C to +85 °C
Average temperature within 24 hours: Maximum 35 °C
Altitude: Maximum 2,000 m above sea level
Relative humidity: Maximum 95% (non-condensing)
Impact resistance: IK08
Maximum charging power: 22 kW (32 A, 3-phase)
Amps and status display: Readable via LED ring and app
Charging power setting: Via push button and app. Via charging current in 1 amp steps between 6 A and 32 A
1-phase charging car: 1.4 kW up to 7.4 kW
Two-phase car charging: 2.8 kW up to 14.8 kW
Three-phase charging car: 4.2 kW up to 22 kW
Note charging power: Country-specific restrictions must be observed. Two-phase connection of the charger is not possible. go-e Charger switches off the power available on the connection. Charging power depends on the number of phases in the vehicle's onboard charger.
Connection to the car: Type 2 socket (according to EN 62196-2) with mechanical lock (own type 2 cable, available as an accessory). Cars with type 1 can be charged with type 2 to type 1 adapter cable (available as an accessory).

Material

App

go-e

Charger Gemini Fixed 2.0

Article number: E1388

Many smart features that make charging electric cars even more convenient are already integrated in the go-e Charger Gemini 2.0. The docking station is suitable for indoor and outdoor installation in both private and commercial environments (without selling charging power). The charger can be connected directly to the mains connection using the 1.8 meter long connection cable. There is no need to open the go-e Charger during the installation process.

Simple charging of any electric vehicleThe go-e Charger can be installed with a minimum of work depending on the electrical system and put into operation very quickly. Simply attach the wall bracket, connect the wallbox and plug it into a suitable power source* Charging is as easy as with a smartphone. Connect the type 2 cable and immediately the go-e Charger will charge to default settings at the power level specified by the vehicle. If necessary, the charging current can be adjusted directly on the device using the black push button.

Many safety features The go-e Charger's comprehensive safety features ensure that you can sit back and relax while your car charges reliably. If necessary, the charging box down-regulates the current (static/dyna- matic** load control) or cuts it off completely if fault currents occur. In this way, the charger protects the vehicle, the electrical installations in the house and itself from damage. the go-e Charger is equipped with a DC protection module that protects the house installation against possible DC fault currents that can be caused by an electric vehicle. On the building side, an HFI relay type A and an RCD must be installed. the go-e Charger also provides additional protection against AC faults (6 mA DC, 20 mA AC).

Full control - via the app even from the couch All charging processes can in principle also be carried out with the go-e Charger without an app. The wallbox indicates the current charging status via an LED ring. All details about the charging status can be accessed even more easily via the go-e Charger app. It can also be used to adjust all basic and advanced settings if needed. With the integrated power meter, you can also keep an eye on the amount of power charged. By integrating the charging box into a WLAN network or with an active mobile connection to the charger, you can even control and monitor the device from the sofa.

Can be used indoors and outdoors Thanks to the IP65 rating, the go-e Charger can always deliver full performance regardless of weather conditions. The charging cable can be locked for theft protection. For outdoor installation, you can protect the wall box from unauthorized use using the RFID chip. RFID chips also make sense if several people share the device. The charged power is displayed separately for each user.

Different charging modes for cost-effective and sustainable chargingIt's easy to come home after work and start charging right away, but it's not necessarily sustainable and cheap. With smart features like the charging timer, you can postpone your charges with the go-e Charger to times when there is excess power in the grid. This relieves the grid and can also pay off financially depending on the electricity price.

Charge even smarter with the go-e ControllerWith the go-e Controller you can take your charging experience to the next level. With the go-e Controller, you can activate dynamic load management to avoid overloading the grid while charging your car. the go-e Controller also helps you to easily utilize excess power from your solar panels and monitor your energy flows. To further optimize your charging, we recommend a complete solution consisting of a go-e Charger and an energy management system such as a go-e Controller.

*This work should only be carried out by an authorized electrician. **with go-e Controller Due to legal regulations, the go-e Charger Gemini 2.0 may not be used in the following countries: Netherlands, France, Italy.