**General:**
- Manufacturer: Next Green
- Manufacturer's article number: 2700872
- EFUEL article number / SKU: E683
- Material: Powder coated steel
- Color: Graphite grey


**Dimensions: Dimensions**
- Weight: 2,0 kg
- Height: 384 mm
- Width: 180 mm


**Dimensions of packaging**
- Weight: 2.0 kg
- Height: 590 mm
- Width: 235 mm
- Depth: 90 mm

Specifications

**Product sheet:**

[Download product sheet (SE)](<https://efuel-cdn.imgix.net/cms/Produktblad_Poleplate_180_G_e1dac95e25/Produktblad_Poleplate_180_G_e1dac95e25.pdf>)

Material

Next Green Green Poleplate 180 G - Zaptec Go is a pole mount for charging boxes, intended for mounting on Ø 60 mm pole tubes. Poleplate is made of Swedish steel and powder coated for highest quality. Poleplate is designed to easily mount a charging box. Poleplate is manufactured in Sweden for the Nordic climate. It is supplied in a powder-coated finish to withstand weather and wind. Charging box holder Poleplate 180 G is a cost-effective pole mount developed for Zaptec GO charging box. Poleplate facilitates, for example, when changing from engine heater location to charging location and can be used to replace an engine heater center.

- Hole pattern for Zaptec Go charging box
- For mounting on Ø 60 mm pole tubes
- Robust steel construction
- Powder coated.

Next Green Green Poleplate 180 G - Zaptec Go is a pole mount for charging boxes, intended for mounting on Ø 60 mm poles. Poleplate is made of Swedish steel and powder coated for highest quality. Poleplate is designed to easily mount a charging box. Poleplate is manufactured in Sweden for the Nordic climate. It is supplied in a powder-coated finish to withstand weather and wind. Charging box holder Poleplate 180 G is a cost-effective pole mount developed for Zaptec GO charging box. Poleplate facilitates, for example, when changing from engine heater location to charging location and can be used to replace an engine heater center.

Next Green Poleplate 180 G - Zaptec Go

Title

Poleplate 180 G - Zaptec Go

Default Title

**General:**

- Manufacturer: ONEPOLE
- EFUEL article number: E571
- Lev. article no: QB1WG


**Technical specification**

- Net weight: 3,24 kg
- Gross weight: 3,48 kg
- Net dimensions: 625x116x116 mm
- Gross dimensions: 650x125x125 mm
- Material: Powder coated seawater resistant aluminum
- Surface treatment: Powder coated ISO 12944, Category C4
- Protection class: Class I, must be connected to PE


Accessories:

- 2 pcs. M8-10 Allen screws
- 1 pc. M5 nut with washers
- 1 pc. bottom cover
- 1 pc. access panel
- 1 pc. top cap

**Product sheet:**

[Download product sheet (SE)](<https://efuel-cdn.imgix.net/cms/ONEPOLE_PRO_SIXTY_2b6df3b87a/ONEPOLE_PRO_SIXTY_2b6df3b87a.pdf>)

**Manuals:**

[ONEPOLE Simple Guide (EN)](<https://efuel-cdn.imgix.net/cms/ONEPOLE_Simple_guide_2024_Versjon_1_ENG_f4d7e31d71_2_f8ad7d8d96/ONEPOLE_Simple_guide_2024_Versjon_1_ENG_f4d7e31d71_2_f8ad7d8d96.pdf>)

[ONEPOLE User Manual - Pedestal With Asseccories (EN)](<https://efuel-cdn.imgix.net/cms/User_Manual_ONEPOLE_Rev_1_0_eb843c4ca8/User_Manual_ONEPOLE_Rev_1_0_eb843c4ca8.pdf>)

The**ONEPOLE PRO Sixty** is a prominent pole mount for the ONEPOLE PRO series and measures 625 mm in height. Its distinctive feature is the ability to rotate 180 degrees, ideal for ceiling mounting in spaces with restrictions. Constructed from seawater-resistant aluminum and protected with a durable Jotun powder coating, it is built for endurance, especially near the coastline. With its Ø60 pipe fit, the ONEPOLE Sixty offers versatile mounting options, making it an obvious choice for installations on Ø60mm poles.

- Flexible solution for new or existing installations on Ø60mm poles.
- Modular and universal pole that fits most of the known charging boxes on the market
- Durable with 75% recyclable aluminum and is 95% recyclable after its lifetime


**Need help building your ONEPOLE PRO?**

Try the ONEPOLE configurator [here](<https://www.onepole.no/sv/configurator/stage/type>)

**Larger order? Request a quote via partner@efuel.se**

The ONEPOLE PRO Sixty is a prominent pole mount for the ONEPOLE PRO series and measures 625 mm in height. Its distinctive feature is the ability to rotate 180 degrees, ideal for ceiling mounting in spaces with restrictions. Constructed from seawater-resistant aluminum and protected with a durable Jotun powder coating, it is built for endurance, especially near the coastline. With its Ø60 pipe fit, the ONEPOLE Sixty offers versatile mounting options, making it an obvious choice for installations on Ø60mm poles.

- Flexible solution for new or existing installations on Ø60mm poles.
- Modular and universal pole that fits most of the known charging boxes on the market
- Durable with 75% recyclable aluminum and is 95% recyclable after its lifetime

ONEPOLE PRO Sixty pole attachments

ONEPOLE PRO Sixty

ONEPOLE PRO SIXTY

PRO Sixty

**General:**

- Manufacturer: ONEPOLE
- EFUEL article number: E575
- Lev. article no.: Q9MSN


**Technical specification**

- Net weight: 6,92 kg
- Gross weight: 7,22 kg
- Net dimensions: 1490x116x116 mm
- Gross dimensions: 1515x122x125 mm
- Material: Powder coated sea steel aluminum
- Surface treatment: Powder coated ISO 12944, Category C4
- Protection class: Class I, must be connected to PE


Accessories:

- 8 pcs. M5-12 UH
- 2 pcs. M8-10 Allen screws
- 1 pc. Blind cap
- 1 pc. Inspection hatch
- 1 pc. Bottom cover with ø60
- 1 pc. Top cover
- 1 pc. top cap

**Product sheet:**

[Download product sheet (SE)](<https://efuel-cdn.imgix.net/cms/ONEPOLE_PRO_1500_with_O60_conversion_2_d03d163251/ONEPOLE_PRO_1500_with_O60_conversion_2_d03d163251.pdf>)

**Manuals:**

[ONEPOLE Simple Guide (EN)](<https://efuel-cdn.imgix.net/cms/ONEPOLE_Simple_guide_2024_Versjon_1_ENG_f4d7e31d71_2_f8ad7d8d96/ONEPOLE_Simple_guide_2024_Versjon_1_ENG_f4d7e31d71_2_f8ad7d8d96.pdf>)

[ONEPOLE User Manual - Pedestal With Asseccories (EN)](<https://efuel-cdn.imgix.net/cms/User_Manual_ONEPOLE_Rev_1_0_eb843c4ca8/User_Manual_ONEPOLE_Rev_1_0_eb843c4ca8.pdf>)

The**ONEPOLE PRO with Ø60 bracket** has a height of 1500 mm. Specifically designed to be mounted directly on Ø60 mm pipes, this model also offers a practical connection hatch and the possibility of parallel connections. Its robust construction and adaptability make it ideal for projects that need a stable and reliable column solution with flexible connection options. Typical application is when replacing engine heaters with EV chargers.

- Flexible solution for new or existing installation on Ø60mm poles.
- Modular and universal post that fits with most known charging boxes on the market
- Durable with 75% recyclable aluminum and is 95% recyclable after its lifetime


**Need help building your ONEPOLE PRO?**Try the ONEPOLE configurator [here](<https://www.onepole.no/sv/configurator/stage/type>)

**Larger order? Request a quote via partner@efuel.se**

ONEPOLE PRO 1500 with Ø60 bracket

ONEPOLE PRO 1500 with Ø60 conversion

PRO 1500 with Ø60 bracket

The Polebox Single Bracket 190.S is compatible with the following chargers:

- Charge Amps Halo
- Easee Charge Lite
- DEFA Power
- Wallbox Copper
- Wallbox Pulsar Plus/Max
- Wallbox Pulsar Pro
- Zaptec Go





Description

**General:**

- Manufacturer: Next Green
- EFUEL's Article Number / SKU: E81

**Dimensions and Weight:**

- Weight: 8 kg
- Height: 560 mm
- Width: 350 mm
- Depth: 370 mm

**Manuals:**

[Manual](https://efuel-cdn.imgix.net/cms/24000200_999_Polebox_Assembly_f3afcb650d/24000200_999_Polebox_Assembly_f3afcb650d.pdf)

The single mount offers the possibility to replace the engine heater with an insert for mounting a charging box. In the pole mount, there is a terminal block for easy connection and installation.

- Easy assembly on 60 mm pole tube
- Robust construction in high-strength steel
- Prepared for the installation of a ground fault circuit interrupter, 3G/4G router
- Distribution terminal for easy further connection of the service
- The distribution terminal supports 1.5 mm2 – 25 mm2 cable, Al and Cu
- The included grommets are designed for a cable diameter of up to 14mm (5G2.5). Larger dimensions require alternative strain reliefs and drilling. Ensure the hole is protected against corrosion
- Compatible with chargers from DEFA, Charge Amps, Wallbox, and Easee (see more in "Product Description")

Polebox Singelfäste 190.S - 60mm - ritning

The single mount offers the possibility to replace the engine heater with an insert for mounting a charging box. In the pole mount, there is a terminal block for easy connection and installation.

- Easy assembly on 60 mm pole tube
- Robust construction in high-strength steel
- Prepared for the installation of a ground fault circuit interrupter, 3G/4G router
- Distribution terminal for easy further connection of the service
- The distribution terminal supports 1.5 mm2 – 25 mm2 cable, Al and Cu
- Compatible with chargers from DEFA, Charge Amps, Wallbox, and Easee (see more in "Product Description")

Polebox single mount 190.S

Next Green Polebox single mount 190.S

Polebox Single mount 190.S - 60mm

The Polebox Double Mount 205.D2 is compatible with, among others, the following chargers:

- Charge Amps Halo
- Easee Lite Charge
- DEFA Power
- Wallbox Copper
- Wallbox Pulsar Plus/Max
- Wallbox Pulsar Pro
- Zaptec Go

**General:**

- Manufacturer: Next Green
- EFUEL's item Number / SKU: E80

**Dimensions and Weight:**

- Width: 362 mm with roof, 203 mm mounting surface
- Height: 552 mm
- Depth: 470 mm including roof
- Weight: 10 kg

*Manuals:**

[Manual)](https://efuel-cdn.imgix.net/cms/24000200_999_Polebox_Assembly_f3afcb650d/24000200_999_Polebox_Assembly_f3afcb650d.pdf)

The double bracket offers the possibility to replace the engine heater with an insert for mounting two charging boxes. In the pole mount, there is a terminal block for easy connection and installation.

- Easy assembly on 60 mm pole tube
- Robust construction in high-strength steel
- Distribution terminal for easy further connection of the service
- The distribution terminal supports 1.5 mm2 – 25 mm2 cable, Al and Cu
- The included grommets are designed for a cable diameter of up to 14mm (5G2.5). Larger dimensions require alternative strain reliefs and drilling. Ensure the hole is protected against corrosion
- Prepared for the installation of two ground fault circuit interrupters, 3G/4G router
- Compatible with chargers from Easee, DEFA, Charge Amps, Wallbox, and Zaptec (see more in "Product Description")

The double bracket offers the possibility to replace the engine heater with an insert for mounting two charging boxes. In the pole mount, there is a terminal block for easy connection and installation.

- Easy assembly on 60 mm pole tube
- Robust construction in high-strength steel
- Distribution terminal for easy further connection of the service
- The distribution terminal supports 1.5 mm2 – 25 mm2 cable, Al and Cu
- Prepared for the installation of two ground fault circuit interrupters, 3G/4G router
- Compatible with chargers from Easee, DEFA, Charge Amps, Wallbox, and Zaptec (see more in "Product Description")

Polebox double mount 205.D2

Next Green Polebox double mount 205.D2

Pole box Double bracket 205.D2 - 60mm

**General:**

- Manufacturer: ONEPOLE
- EFUEL article number: E553
- Lev. article no: QB1WF


**Technical specification**

- Net weight: 0,66 kg
- Gross weight: 0,76 kg
- Net dimensions: 325x172x40 mm
- Gross dimensions: 330x185x55 mm
- Material: Powder coated sea steel aluminum
- Surface treatment: Powder coating ISO 12944, Category C4


Accessories:

- 2 pcs. M6x16 UH, 
- 4 pcs. M5x8 tx25 CH.

**Product sheet:**

[Download product sheet (SE)](<https://efuel-cdn.imgix.net/cms/ONEPOLE_PRO_Mounting_Bracket_for_Zaptec_GO_dd7b5f9ca9/ONEPOLE_PRO_Mounting_Bracket_for_Zaptec_GO_dd7b5f9ca9.pdf>)

**Manuals:**

[ONEPOLE Simple Guide (EN)](<https://efuel-cdn.imgix.net/cms/ONEPOLE_Simple_guide_2024_Versjon_1_ENG_f4d7e31d71_2_f8ad7d8d96/ONEPOLE_Simple_guide_2024_Versjon_1_ENG_f4d7e31d71_2_f8ad7d8d96.pdf>)

[ONEPOLE User Manual - Pedestal With Asseccories (EN)](<https://efuel-cdn.imgix.net/cms/User_Manual_ONEPOLE_Rev_1_0_eb843c4ca8/User_Manual_ONEPOLE_Rev_1_0_eb843c4ca8.pdf>)

The ONEPOLE PRO Mounting Bracket is a single bracket specifically designed for the Zaptec Go, complete with precision manufactured 316L stainless steel screws for customized installation of charging stations. Easily mounted on ONEPOLE poles and pole brackets.

**Need help building your ONEPOLE PRO?****Try the ONEPOLE configurator [here](<https://www.onepole.no/sv/configurator/stage/type>)]**

The ONEPOLE PRO Mounting Bracket is a single bracket specifically designed for the Zaptec Go, complete with precision-machined 316L stainless steel screws for customized installation of EV chargers. Easily mounts to ONEPOLE poles and pole brackets.

Poleplate 180 G - Zaptec Go

Article number: E683

The product fits with

EFUEL

Complete pole pipe 60 mm with foundation

Pretec

Charging pole 60mm

Next Green

Pipe bracket Plank and Facade 60-540

Next Green

Pole Mount – Beam and facade 60-108

Next Green

Next Green angled mount 60

Next Green

Pole Pipe 1500 mm PL (Powder Coated Graphite Grey)

Other customers also viewed

ONEPOLE

PRO Sixty

ONEPOLE

PRO 1500 with Ø60 bracket

Next Green

Polebox single mount 190.S

Next Green

Polebox double mount 205.D2