**General:**

- Manufacturer: Zaptec
- EFUEL part number / SKU: E1149
- Manufacturer part number: 860-00004

Specifications

**Product sheet:**

[Product sheet (SE)])

Material

A new cover for the charging socket of Zaptec Pro chargers.

Zaptec Pro protection for charging sockets

Title

Zaptec Pro skydd för ladduttag

Pro protection for charging sockets

Default Title

**Features and benefits:**
The Charge Core can charge up to 7.4 kW on a single-phase circuit and up to 22 kW on a three-phase circuit. The charger is continuously updated with the latest functionality.

- Easee Link™ local load and phase balancing.
- Automatic queue system.
- Permanent locking of the Type 2 cable.
- Integrated RFID reader (NFC / ISO 14443 and MIFARE Classic®).
- Universal, fits all types of electric cars and power supplies.
- Full control with Easee App or third party integrations.
- Manufacturer's warranty 3 years in EU.
- Built-in residual current device (RCD).*

_*Integrated residual current device of Type A 30 mA AC approved according to EN 60947-2, as well as 6 mA
residual current detection device (RDCDD) according to IEC 62955, 9.9. The RCD cuts the current if a residual current exceeding 6mA DC or 30mA AC is detected. The earth fault circuit breaker is automatically tested between each charging occasion or at least every 24 hours. To manually start the RCD test, use the Installer App._

Product description

- Manufacturer: Easee

EFUEL's article number / SKU
- Easee Charge Core - Black [E329]
- Easee Charge Core - White [E540]
- Easee Charge Core - Anthracite Gray [E541]
- Easee Charge Core - Red [E542]
- Easee Charge Core - Blue [E543]

**Technical specification:**

**Connection Point Protection**
- Integrated RCD type A 30 mA AC according to EN 60947-2.
- Integrated RDC-DD 6mA DC according to IEC 62955, 9.9.
- Temperature monitoring.
- Overload protection.
- Degree of protection: IP54 (the back is IP22 without cover).
- Impact resistance: IK10.
- Insulation class: I.
- Overvoltage category III.
- Theft protection.

**Complies with the following regulations**
- 2014/53/EU (RED).
- 2011/65/EU (RoHS).
- 2014/30/EU (EMC).
- 2014/35/EU (LVD).
- See DoC for details at easee.com/doc

**Charging power**
- 1-phase: 1.4 kW (6 A) - 7.4 kW (32 A).
- 3-phase TN: 4.1 kW (6 A) - 22 kW (32 A).
- 3-phase IT: 2.4 kW (6 A) - 12.7 kW (32 A).

**Electrical Specifications**
- Voltage: 3x 230 V / 400 V AC (±10%).
- Mains frequency: 50 Hz.
- Power supply: TN, IT, TT.
- Connection point: Type-2 socket.
- Automatic adjustment of charging speed based on available power.
- Automatic phase balancing.
- Built-in energy meter (±2%).
- Unlimited number of chargers per installation.

**Connection**
- Wi-Fi 2.4 GHz b/g/n.
- Bluetooth BLE 4.2.
- Built-in eSim (LTE Cat M1).
- OCPP 1.6.
- Easee LinkRF (between charger / between charger and Equalizer).
- Built-in RFID/NFC reader for access control.
- Easee App for control and monitoring.

**Dimensions and weight:**
- Dimensions (mm): H: 256 x W: 193 x D: 106.
- Wall mounting (mm): c/c H: 160 x W: 125.
- Working temperature: -30 °C to +40 °C.
- Weight: 1.5 kg.

**Installation**
- Automatic detection of power grids (TN, IT, TT).
- Circuit breaker: Max 80A.
- Max number of chargers per circuit: 101 pcs
- The size of the fuse must be configured by an electrician in the back plate of the charger using the Easee Installer App.
- Wire cross section: up to 16 mm2 (one cable) / up to 10 mm2 (parallel connection).
- Cable diameter: 8–22 mm.
- Final tightening: 5 Nm.
- Unsheathing length: 12 mm.

**Product sheet:**

[Easee Charge Core - Product sheet (EN)](https://efuel-cdn.imgix.net/cms/EN_Charge_Core_Productsheet_c3551172c7/EN_Charge_Core_Productsheet_c3551172c7.pdf)

[Easee Charge Core - Brochure Commercial Charging (EN)](https://efuel-cdn.imgix.net/cms/EN_Commercial_Charging_Brochure_V1_01_5767202986/EN_Commercial_Charging_Brochure_V1_01_5767202986.pdf)

[Easee Charge Core - Installer's Guide (EN)](https://efuel-cdn.imgix.net/cms/EN_Charge_Core_IG_75d971a5f7/EN_Charge_Core_IG_75d971a5f7.pdf)

[Easee Charge Core - User Guide (EN)](https://efuel-cdn.imgix.net/cms/EN_Charge_Core_UG_f1de36f027/EN_Charge_Core_UG_f1de36f027.pdf)

[Easee Charge Core - EU Declaration of Conformity (DOC) (EN)](https://efuel-cdn.imgix.net/cms/07a_Declaration_of_Conformity_Charge_Core_f707350d14/07a_Declaration_of_Conformity_Charge_Core_f707350d14.pdf)

**Easee Charge Core** is a scalable solution to promote the deployment of multiple charging points in commercial buildings and apartment complexes. Continuous updates ensure that your charger always has the latest functionality. The Charge Core is equipped with advanced features such as Easee Link™ for local load and phase balancing, an automatic queuing system and permanent locking of the Type 2 cable, making it the perfect solution for both condominiums and commercial environments. In addition, you can easily monitor and control charging via the Easee App or integrate it with third-party systems for maximum flexibility. Explore an intelligent, scalable and cost-effective charging solution that is ready to meet the demands of the future.

- **Phase balancing:** The product offers a unique phase balancing that automatically selects between 1-phase and 3-phase charging based on available capacity in each phase (dynamic load balancing against the property via [Equalizer](https://www.efuel.eu/products/load-balancers/equalizer-home-han-port). This makes it possible to utilize close to 100% of the available energy, which contributes to efficient charging over time.

- **Safety:** The charger has an integrated residual current device (RCD) that self-tests between each charging session and at least once every 24 hour period. Using more than forty sensors inside the charger, it continuously monitors for faults and abnormal changes in currents, voltages, temperatures and humidity, both during charging and in standby mode. In the event of an unexpected temperature increase, the charging box will automatically shut down and warn you if a certain safety limit is reached.

- **Easy installation:** With a built-in and approved ground fault circuit breaker, the installer can easily parallel connect the charging stations on the same circuit, saving both time and money. The Easee Installer app allows installers to manage chargers directly from their phone. The app offers a flexible solution for adding circuits and backplates to new and existing charging facilities, simplifying the process.

- **Scalable:** The Easee Ready backplate enables easy expansion of the charging infrastructure by clicking additional chargers into place. This allows for smooth growth for various applications, from residential to commercial use, and ensures that future needs are met.

Are you an installer and would you like to become a reseller of Easee Charge Core? The charging box is designed to deliver maximum efficiency and can charge up to 22kW. Continuous updates ensure that your charger always has the latest functionality. The Charge Core is equipped with advanced features such as Easee Link™ for local load and phase balancing, an automatic queuing system and permanent locking of the Type 2 cable, making it the perfect solution for both condominiums and commercial environments. In addition, you can easily monitor and control charging via the Easee App or integrate it with third-party systems for maximum flexibility. Explore an intelligent, scalable and cost-effective charging solution that is ready to meet the demands of the future.

Easee Charge Core | Charging box for Housing societies and Companies

Color

Easee Charge Core

Charge Core

Black

White

Anthracite Grey

Blue

**Features and benefits:**

*MID certified:*

The MID meter measures and displays the current consumption of electricity. This provides 100% transparency to the end-user and the ability to see exactly how many kW were used to charge the EV. The MID meter is also a requirement in many countries, so Charge Amps Dawn meets European standards and is therefore ready for the European market.

*The installers' best friend:*

Charge Amps strives to be the installers' best friend and Dawn is developed with a backplate where the installation and configuration is done. Thanks to the backplate, both wiring and cable connection are also greatly simplified. In addition, there is "The Installation Wizard" that smoothly guides the installer through the entire installation process, step by step.

*Built-in earth leakage circuit breaker:*

The Charge Amps Dawn also has a built-in type B RCD and DC protection in the charger. This protects the electric vehicle from earth faults and ensures that the vehicle is not damaged.

**Partner account with Charge Amps:**

Remember that as an installer you need to obtain a Partner account to be able to install, configure and manage Charge Amps' various products in the best possible way. All more advanced settings, such as setting up and configuring a load balancer, require such a Partner account.

*How do you get a Partner account?* Visit the Charge Amps Help Center and submit a request by selecting the "Partner Account" option in their support form - [link](<https://support-se.zendesk.com/hc/sv-se/requests/new>).

**General:**

- Manufacturer: Charge Amps
- Manufacturer part number: 130297
- EFUEL part number / SKU: E273
- Manufacturer warranty: 5 years


**Technical Information:**

- Charging current: 6-32 A or 1-3 phase
- Voltage: 230/400 V
- Operating temperature: -35°C to +45°C
- Identification: RFID
- Charging standard: Mode 3
- Connectivity: WiFi, 4G LTE, Bluetooth
- Communication protocol: OCPP 1.6J
- Fault current protection: Separate DC fault current protection and a type B RCD is integrated in the charging station
- Energy measurement: MID, 3-phase voltage, current and power
- IP rating: IP 54 inner housing/module; IP 44 outer housing
- IK rating: IK 10
- Sockets: Type 2, 22 kW
- SIM card eSIM: 33, included in the charging station


**Dimensions and weight:**

- Dimensions: (W × D × H) 250 × 145 × 378 mm
- Weight: 3,5 kg

**Product sheet:**

[Product sheet (EN)](<https://efuel-cdn.imgix.net/cms/Charge_Amps_product_sheet_dawn_ENG_240513_low_res_d098d164b5/Charge_Amps_product_sheet_dawn_ENG_240513_low_res_d098d164b5.pdf>)

**Manuals:**

[Installation manual (EN)](<https://efuel-cdn.imgix.net/cms/Charge_Amps_Dawn_Installation_Manual_rev01_fdb8deafc3/Charge_Amps_Dawn_Installation_Manual_rev01_fdb8deafc3.pdf>)

[User manual (EN)](<https://efuel-cdn.imgix.net/cms/Charge_Amps_Dawn_User_Manual_rev01_62fdefdcf6/Charge_Amps_Dawn_User_Manual_rev01_62fdefdcf6.pdf>)

**Training:**

Become a certified Charge Amps installer via the Charge Amps Academy training courses. [To the Charge Amps Academy](<https://www.chargeamps.com/sv/academy/>).

**Video:**

[Installation video (EN)](<https://www.youtube.com/watch?v=jqODIM7rBSw>)

[Introduction video (EN)](<https://www.youtube.com/watch?v=Yj1ichuaJYE>)

**Sales material:**

Find sales material for Charge Amps [here](<https://www.efuel.se/material/salj-och-marknadsmaterial>).

**Now with 5 years warranty and free 4G**

Charge Amps Dawn is a user-friendly, intelligent and powerful charging station built for the future. Dawn can charge up to 22kW, is easy to install and use, and can be connected to Charge Amps Cloud and Charge Amps App.

- Certified MID meter
- 4G or WiFi for constant connectivity
- Built-in earth leakage circuit breaker and DC protection
- OCPP interoperability
- MID meter
- Suitable for home charging and BRF, villa and business charging
- Compatible with Perific (Enegic) Monitor EVI (E293) and Charge Amps Amp Guard (E274) load balancers


Please note that a separate installation kit is required to enable series connection of multiple chargers. See "Charge Amps Dawn installation kit".

Charge Amps Dawn is a user-friendly, intelligent and powerful charging station built for the future. The charging station is easy to install, simple to use and can be connected to Charge Amps Cloud and Charge Amps App. This means that the owner can take full control of charging and use all our intelligent solutions. Charge Amps Dawn also has a powerful Linux processor that can handle large amounts of data.

Charge Amps Dawn - 22kW 3P 32 A

Charge Amps Dawn

Dawn

Really easy installation:

CHARGESTORM® CONNECTED is designed for easy installation and great user experience. CC3 is updated on several points with you as an installer in mind, both communication and power cables can be sewn inside the unit which reduces both installation time and cost. Maximum cable area to the charging box is 25mm2. The cable harness is connected from below or from behind via pre-punched holes.

Mounting and connection:

CC3 can easily be mounted on a wall with only 4 screws. It can also be mounted on a standard 60mm pole by attaching the mounting plate to the back of the CC3.

Quality guaranteed with CTEK:

Quality is at the heart of everything CTEK does, safety, simplicity and flexibility are the hallmarks of all our products and solutions. CTEK is a leader in battery management solutions and supplies products to more than 70 countries worldwide. CTEK is also a trusted subcontractor to many of the world's most respected car and motorcycle manufacturers.

**General:**
- Manufacturer: CTEK
- EFUEL part number / SKU: 
CTEK CC3 Single socket: E674 
CTEK CC3 Double socket: 675
- Manufacturer warranty: 5 years


**Technical Information:**
- Version: 3
- Charging category: AC charging
- Operating temperature: -30 °C to +50 °C
- Locking motor (type 2 socket: )Yes
- Charging current: 32 A
- Sockets: One or two type 2 sockets; Schuko; One or two T2S sockets
- Authentication: RFID, App
- Load Balancing: Includes load balancing (NANOGRID™ Internal) between dual sockets on EVSE, option for other load balancing solutions between multiple devices (NANOGRID™ HOME, NANOGRID™ AIR, NANOGRID™ CGC)
- Number of phases: 3-phase
- Schuko sockets: Type E/Type F
- Communication protocol: OCPP 1.6/OCPP 2.0.1
- Approval: Download the Declaration of Conformity from WWW.CTEK.COM
- Energy metersMID approved; Current transformers; Eichrecht
- Electrical connection: up to 25 mm 2 connection terminals
- Frequency50 Hz
- Connections: 4G (optional); 2 x Ethernet; Wi-Fi
- Relative humidity: Up to 100% at 25°C
- Color cover plastic part: Black
- Compliance: RED; IEC 62196; CE; IEC 61851-1
- Cover material: Plastic; Metal
- Cover closure: Key
- Rated voltage: (in)400 V
- Earth fault detection: Built-in earth fault detection, 30 mA AC, 6 mA DC
- Earth fault reset: Semi-automatic
- RFID reader: Yes
- RFID tag: standard ISO15693, ISO14443A (MIFARE)
- Enclosure class: IP54
- Impact resistance: IK10
- Cover dimensions (L x W x H): 160 x 282 x 449 mm
- App support: Taking Charge App for Android and IOS (requires EVSE to be connected to the Charge portal cloud service)
- User interface: LED symbols
- Weight: Up to 24 kg
- Internal fuse: 32 A per socket
- Rated power: Up to 22 kW
- Charging capacity: 22 kW
- Cyber security: Yes
- ISO: 1511815118-2 EIM
- Serial connection: Network; Power


Reservation: All products and product specifications are subject to change without notice, due to improvements in reliability, function or design. In the event of a manufacturing defect, CTEK reserves the right to inspect the product to confirm the defect. All CTEK products are covered by standard warranty terms.

**Product sheet:**

[Product sheet single socket (EN)](<https://efuel-cdn.imgix.net/cms/CHARGESTORM_CONNECTED_40_645_productsheet_low_UK_EN_2622c7d7c9/CHARGESTORM_CONNECTED_40_645_productsheet_low_UK_EN_2622c7d7c9.pdf>)

[Double socket product sheet (SE)](<https://efuel-cdn.imgix.net/cms/CHARGESTORM_CONNECTED_3_productsheet_low_UK_EN_7d22805725/CHARGESTORM_CONNECTED_3_productsheet_low_UK_EN_7d22805725.pdf>)

**Marketing material:**
Find sales material [here](<https://drive.google.com/drive/folders/155YKBaGjqg8n1J_ltsE7TbUgKi7o8K6O?usp=drive_link>)

**Future-proof EV charging built for the future**
CC3 is available with one or two sockets. The charging power is always up to 22kW. CC3 is cyber security tested and detects if it is opened to minimize manipulation. CC3 can be connected in several ways, such as; Wi-Fi, LAN or 4G (option). Our scalable load balancing NANOGRID can now also be done wirelessly via Wi-Fi. Load balancing via fixed cabling is of course also available as an option. CC3 is compatible with various third-party backend systems via OCPP 2.0.1 and is prepared for 'Plug & Charge' and Vehicle-to-grid (V2G).

**Features and functions**
- Up to 2x22 kW charging power with single or dual Type 2 sockets/charging cables
- Internet access to backend systems via Wi-Fi, LAN or 4G (option)
- Prepared for next generation charging services such as 'Plug & Charge' and 'V2G', based on ISO15118 and OCPP 2.0.1 communication protocols
- IK10/IP54
- Serialization of power and network cabling for easier and faster installations
- Wall or pole mounting
- 5 years warranty

**Larger orders? Request a quote via partner@efuel.se**

The CTEK CC3 is available with one or two sockets. The charging power is always up to 22kW. The CC3 is cyber security tested and detects if it is opened to minimize manipulation. CC3 can be connected in several ways, such as; Wi-Fi, LAN or 4G (option). Our scalable load balancing NANOGRID can now also be done wirelessly via Wi-Fi. Load balancing via fixed cabling is of course also available as an option. CC3 is compatible with various third-party backend systems via OCPP 2.0.1 and is prepared for 'Plug & Charge' and Vehicle-to-grid (V2G).

**Features**
- Up to 2x22 kW charging power with single or dual Type 2 sockets/charging cables
- Internet access to backend systems via Wi-Fi, LAN or 4G (option)
- Prepared for next generation charging services such as 'Plug & Charge' and 'V2G', based on ISO15118 and OCPP 2.0.1 communication protocols
- IK10/IP54
- Serialization of power and network cabling for easier and faster installations
- Wall or pole mounting

**Larger order? Request a quote via partner@efuel.se**

CTEK Chargestorm Connected 3 | Become a Reseller

Antal Uttag

CTEK Chargestorm Connected 3

Chargestorm Connected 3

CTEK CC3 Ett uttag

CTEK CC3 Dubbla Uttag

**General:**

- Manufacturer: Amokabel
- Manufacturer's article number: 50m: 01202-001-RG50 / 500m: 01202-001-TR500
- EFUEL part number / SKU: 50m: E690 / 500m: E692
- Color: Black
- Conductor number: 5
- Conductor area: 6mm²
- Insulation thickness: 0,7mm
- Conductor diameter: Ø4,5mm
- Length: 50m ring / 500m drum
- Sheath thickness: 1,8mm
- Outer diameter: 14,8 ± 0,3


**Power cable**Max conductor temperature: -25°C/+90°C Voltage class: 0,6/1kV CPR: Dca

**Standards**Conductors: IEC 60228.5 Construction: SS 424 14 18 (itd) Fire: EN50575:2014+A1:2016

**Product sheet:**

[Product sheet (SE)](<https://efuel-cdn.imgix.net/cms/1092638_RXQ_amo_Pro_Datablad_97bd52f80f/1092638_RXQ_amo_Pro_Datablad_97bd52f80f.pdf>)

[Product catalog (SE)](<https://efuel-cdn.imgix.net/cms/1092645_amo_Pro_produktkatalog_231102_31721ddb70/1092645_amo_Pro_produktkatalog_231102_31721ddb70.pdf>)

RXQ amoPro 5G6 is a PEX-insulated, HFFR-sheathed power cable intended for fixed installation indoors and outdoors, directly on walls, on cable ladders, in installation ducts, in pipes and in soil/water. RXQ amoPro can be used in power supply applications, e.g. service/riser cables, heat pumps, electric car chargers and lighting poles.

- Color: Black
- Number of conductors: 5
- Conductor area: 6mm²
- Insulation thickness: 0,7mm
- Conductor diameter: Ø4,5mm
- Length: 50m ring / 500m drum
- Sheath thickness: 1,8mm
- Outer diameter: 14,8 ± 0,3

**Note: 500m is a special-order item. Estimated delivery time is 10 business days. For inquiries, please contact partner@efuel.se**

RXQ amoPro 5G6 is a PEX-insulated, HFFR-sheathed power cable intended for fixed installation indoors and outdoors, directly on walls, on cable ladders, in installation ducts, in pipes and in soil/water. RXQ amoPro can be used with advantage in power supply applications, e.g. service/riser cable, heat pump, electric car charger and lighting poles.

Amokabel RXQ amoPro 5G6 | Power cable for charging box

namesensitive_meter_length

Färg

Amokabel RXQ amoPro 5G6

Amokabel RXQ 5G6 amoPro

RXQ amoPro 5G6

50 / Svart

500 / Svart

**General:**

- Manufacturer: Amokabel
- Manufacturer's article number: 500m: 05035-001-TR500
- EFUEL's article number / SKU: 500m: E693
- Color: Black
- Conductor number: 5
- Conductor area: 10mm²
- Insulation thickness: 0,7mm
- Conductor diameter: Ø5,4mm
- Length: 500m drum
- Sheath thickness: 1,8mm
- Outer diameter: 18,2 ± 0,3


**Power cable**
Max conductor temperature: -25°C/+90°C 
Voltage class: 0,6/1kV 
CPR: Dca

**Standards**
Conductors: IEC 60228.5 
Construction: SS 424 14 18 (itd) 
Fire: EN50575:2014+A1:2016

**Note: This product is a special-order item. Estimated delivery time is 10 business days. For inquiries, please contact partner@efuel.se**

RXQ amoPro 5G10 is a PEX-insulated, HFFR-sheathed power cable intended for fixed installation indoors and outdoors, directly on walls, on cable ladders, in installation ducts, in pipes and in soil/water. RXQ amoPro can be used in power supply applications, e.g. service/riser cables, heat pumps, electric car chargers and lighting poles.

- Color: Black
- Number of conductors: 5
- Conductor area: 10mm²
- Insulation thickness: 0,7mm
- Conductor diameter: Ø5,4mm
- Length: 500m drum
- Sheath thickness: 1,8mm
- Outer diameter: 18,2 ± 0,3

RXQ amoPro 5G10 is a PEX-insulated, HFFR-sheathed power cable intended for fixed installation indoors and outdoors, directly on walls, on cable ladders, in installation ducts, in pipes and in soil/water. RXQ amoPro can be used in power supply applications, such as service/ladder cables, heat pumps, electric car chargers and lighting poles.

Amokabel RXQ amoPro 5G10 | Power cable for EV chargers

Amokabel RXQ amoPro 5G10

Amokabel RXQ 5G10 amoPro

RXQ amoPro 5G10

500 / svart

**General:**

- Manufacturer: Amokabel
- Manufacturer's article number: 500m: 05036-001-TR500
- EFUEL's article number / SKU: 500m: E694
- Color: Black
- Conductor number: 5
- Conductor area: 16mm²
- Insulation thickness: 0,7mm
- Conductor diameter: Ø6,4mm
- Length: 500m drum
- Sheath thickness: 1,8mm
- Outer diameter: 20,9 ± 0,3


**Power cable**Max conductor temperature: -25°C/+90°C Voltage class: 0,6/1kV CPR: Dca

**Standards**Conductors: IEC 60228.5 Construction: SS 424 14 18 (itd) Fire: EN50575:2014+A1:2016

**Note: This product is a special-order item. Estimated delivery time is 10 business days. For inquiries, please contact partner@efuel.se**

RXQ amoPro 5G16 is a PEX-insulated, HFFR-sheathed power cable intended for fixed installation indoors and outdoors, directly on walls, on cable ladders, in installation ducts, in pipes and in soil/water. RXQ amoPro can be used in power supply applications, e.g. service/riser cables, heat pumps, electric car chargers and lighting poles.

- Color: Black
- Number of conductors: 5
- Conductor area: 16mm²
- Insulation thickness: 0,7mm
- Conductor diameter: Ø6,4mm
- Length: 500m drum
- Sheath thickness: 1,8mm
- Outer diameter: 20,9 ± 0,3

RXQ amoPro 5G16 is a PEX-insulated, HFFR-sheathed power cable intended for fixed installation indoors and outdoors, directly on walls, on cable ladders, in installation ducts, in pipes and in soil/water. RXQ amoPro can be used with advantage in power supply applications, e.g. service/ladder cables, heat pumps, electric car chargers and lighting poles.

Pro protection for charging sockets

Article number: E1149

The product fits with

Zaptec

Pro MID (complete incl. back plate)

EFUEL

Charging cable type 2, 20A, 3-20m

Zaptec

Sense

Gacia

Miniature Circuit Breaker 3PC6kA, 16-32A

ONEPOLE

PRO 1500 - Zaptec Pro

Next Green

Complete pole package - Zaptec

Other customers also viewed

Easee

Charge Core

Charge Amps

Dawn

CTEK

Chargestorm Connected 3

Amokabel

RXQ amoPro 5G6