Easee Charge Lite
General:
- Manufacturer: Easee
- EFUEL SKU: E328
Technical Information:
- Dimensions (mm): H: 256 × W: 193 × D: 106
- Wall Mounting (mm): c/c H: 160 x W: 125
- Operating Temperature: -30°C to +50°C
- Weight: 1.5 kg
- Manufacturer's Warranty: 5 years
Connection:
- Wi-Fi 2.4 GHz b/g/n
- Bluetooth 4.3
- Built-in eSim (additional cost)
- OCPP 1.6
- Easee Link (between charger and Equalizer)
- Built-in RFID/NFC reader for access control
- Control and monitor charging with the Easee app
Power Grid and Fuses:
- Voltage: 3x 230 V / 400 V AC (±10%)
- Grid Frequency: 50 Hz
- Grid Types: TN, IT, TT
Charging Power for Charge Lite:
- Single-phase: 1.4 kW (6A) – 7.4 kW (32A)
- 3-phase TN: 4.1 kW (6A) – 11 kW (16A)
- 3-phase IT: 2.4 kW (6A) – 11 kW (28A)
- Chargers per Location: 3
- Connection Point: Type 2 socket
- Automatic adjustment of charging speed based on available power (Equalizer required)
- Automatic charging with solar generation (Equalizer required)
- Automatic phase balancing (Equalizer required)
- Built-in energy meter
Installation:
- Automatic detection of power grid (TN, IT, TT)
- Circuit Breaker: Max 40A
- Fuse size must be configured by an electrician on the backplate of the charger using the Easee Installer App
- Wire Size: Up to 16 mm2 (single cable) / Up to 10 mm2 (parallel connection)
- Cable Diameter: 8–22 mm
- Final tightening torque: 5 Nm
- Stripping Length: 12 mm
Protection:
- Overload protection according to EN IEC 61851-1:2019
- Built-in RCD protection (AC 30 mA / DC 6 mA)
- External RCD protection of type A is required for Charge Lite
- Dustproof/waterproof: IP54. Impact resistance: IK10
- Insulation class: I
- Overvoltage category: III
- 14 built-in temperature sensors for detecting poor connections and faults
Anti-Theft:
- The charging cable can be permanently locked to the charging station with the Easee App.
- Padlock bracket to protect the charger from theft.
Easee Equalizer
General:
- Manufacturer: Easee
- Manufacturer's Item Number: Han-Port RJ45 – 80101; P1 RJ12 – 80110
- EAN: Han-Port RJ45 – 7090052310410
- EFUEL SKU: P1 RJ12 – E173; Han-Port RJ45 – E121
Technical Information:
To make the Equalizer work on the electricity meter, the customer interface port must be enabled. If it is not enabled, the device will not receive power or be able to transfer data. Contact your network operator to enable the customer interface port. Please note that your local network operator may not necessarily be the same as your electricity operator. Activating the customer interface port can take several days, depending on the network operator. Only the person who owns the electricity meter can activate/open the customer interface port. The owner of the electricity meter is the one listed as the recipient on the electricity bill.
Check your electricity meter or contact your electricity distribution company to ensure that you have an activated HAN port (RJ45) or HAN port (RJ12), also known as P1/H1, depending on the national standard you are referring to. Regardless of which port you have, we at EFUEL can assist you.
At EFUEL, we have chosen to refer to the two variants of the HAN port as RJ45 socket and P1 port for RJ12 socket.
